• Welcome to MUST ENERGY !

Solar Inverters

Solar Water Pump Inverter

PT100 Series (1.5-55KW)

PT100 series is MUST newly launches specially for solar pumping inverter applications. Based on the original solar pump inverter products, which optimizes the usability and performance, and extends applicable voltage levels and power range of the product. The voltage level can be applied to single phase/three phase 220V, three phase 380V pumps, power range from 1.5KW to 55KW.

Features

  • Support single phase/three phase 220V, and three phase 380V solar water pump inverter, power from 1.5KW to 55KW.
  • Simply connect the photovoltaic panel to the solar water pump inverter, and the PV pump can be automatically started after power-on.
  • It has protection functions such as PV over-voltage protection, over-temperature automatic protect, etc., which can effectively extendthe life of the product.
  • Ensure solar power tracking efficiency can reach 99%.
  • All series of products can realize automatic switching of PV DC input and grid AC input, which can meet 24 hours of no care work.
  • Supports IP20 grade cabinet solutions.
Functionality DescriptionPT100
TECHNICAL CONTROL PERFORMANCE
Control modeSVC, V/F
Motor typeAsynchronous motro
Speed control accuracy±0.5% (SVC)
Starting torque0.25Hz/150% (SVC)
Torque boostAutomatic torque boost; manual torque boost 0.1%~30.0%
OPERATIONAL CONTROL PERFORMANCE
Frequency commandDigital setting, analog voltage setting, analog current setting, pulse setting, serial port setting, keyboard potentiometer setting. Can be switched in many ways.
Auxiliary frequency commandEleven kinds of auxiliary frequency commands, which can flexibly realize auxiliary frequency fine-tuning and frequency synthesis.
Operation commandOperation command operator panel setting / Control terminal setting / Serial communication port setting / Can be switched in a variety of ways.
Automatic voltage adjustment functionWhen the grid voltage changes, it can automatically keep the output voltage constant.
Speed tracking restart functionAchieve shock-free and smooth start to the rotating motor
EFFICIENCY
MPPT tracking efficiency99.5%max (PV mode)
PROTECTION
Loss phase protectionInput / output loss phase protection
Instantaneous overcurrent protectionStop at ≥250% of rated output current
Over-voltage protectionStop at ≥800V of main circuit DC voltage
Low-voltage protectionThe main circuit DC voltage will stop when undervoltage (different depending on the model)
Over-temperature protectionProtection will be triggered when the inverter bridge over-temperature
Overload protectionOver-load ≥150% 60s,inverter will shutd own
Over current protectionIf rated current over 2.5 times, inverter will shutdown for protection
Brake protectionBraking unit overload protection, braking resistor short circuit protection
Short circuit protectionOutput phase short circuit protection
CONTROL SINGLE
Communication interfaceRS-485 interface
Input terminal X8 X terminals, more than fifty kinds of input function options. The X8 terminal supports high-speed pulse signal input.
Output terminal1 high-speed pulse output terminal (open-collector type is optional),
supports 0~100kHz square wave signal output; 2 AO terminals; 2 relay output terminals.
Control voltage source outputDC24V, 100mA
Analog signal inputAI1: 0V~+10V; AI2: 0~+10V / 0~20mA, the main board dial switch selection. AI3: -10V~+10V;
Analog signal output2 ways, 0~+10V / 0~20mA output programmable, selected by the main board dial switch.
Open-collector output2 ways, multiple operating states are optional; the maximum output current is 50mA.
Programmable rellay output2 ways, multiple states are available; contact capacity: 250VAC/3A or 30VDC/1A.
DISPLAY
Five-digit display31 state parameters such as setting frequency, output frequency, output voltage, output current, motor speed, output torque, switch value terminal, etc., programming menu parameters and
25 fault codes, etc.
Indicator light (LED)Parameter unit, setting direction, RUN/STOP status, control mode
ENVIROMENT
Use occasionsThe room is free from direct sunlight, dust, corrosive gas, combustible gas, oil mist, water vapor, dripping water or salt, etc
Altitude1000 meters below sea level (When the altitude exceeds 1000m, derate at a rate of 1% per 100m height)
Ambient temperature-10℃ ~+40℃ , it is not recommended to tun above 50℃
(when the ambient temperature exceeds 40℃ , derate at a rate of 3% per 1℃ derating)
Humidity5%~95%RH, no condensation
VibrationLess than 5.9m/s2 (0.6g)
Storage temperature-20℃ ~ +60℃ , air temperature change is less than 1℃ /min
Protection classIP20
STRUCTURE
Cooling methodAir cooling
Installation typeWall-mounted